Service · Wesley Chapel, FL
Window & Door Screen Repair in Wesley Chapel
Rebuilt window screens in new or existing frames, plus sliding screen door repair — rollers, tracks, handles and latches that actually work again.
Window and door screens across Wesley Chapel
Window screens are the job most companies will not bother with. There is no drama in a torn bedroom screen and not much money in it either, so homeowners get told to call someone else or get quoted a price that assumes they will not. We do them, because a newer Wesley Chapel home with eight torn screens and no functioning cross-breeze is a real problem in a climate where a February evening with the windows open is one of the few free pleasures of living here.
Sliding screen doors are the other half of this work, and they are almost always misdiagnosed. A door that jumps its track, drags, or will not latch is usually worn rollers plus a track that has been bent by years of being forced. Replacing the door without fixing the track just gives you a new door that jumps the same way.
Window screen work
- Rescreening your existing frames — cheapest option when the aluminum is straight and the corners are sound.
- New frames built to your opening — for frames that are bent, corroded or missing entirely.
- Whole-house rebuilds — every screen in the house done at once, which is meaningfully cheaper per screen than doing them piecemeal.
- Mesh upgrades — no-see-um weave for bedrooms backing up to a pond or conservation area, pet mesh for windows a cat uses as a scratching post.
- Half-screens and specialty shapes — arched, triangular and non-standard openings.
- Solar and privacy mesh — heavier weaves that cut heat gain and sightlines on west-facing windows.
Sliding screen door work
- Roller replacement — the actual fix for about seventy percent of doors that drag or jump.
- Track repair or replacement — straightening or replacing bent bottom track so the new rollers have something to run on.
- Handles and latches — doors that close but will not stay closed.
- Rescreening the door panel — often combined with roller work in one visit.
- Full door replacement — see screen door replacement for when the frame itself is past saving.
What window and door screen repair costs
| Job | Typical range | What moves the price |
|---|---|---|
| Rescreen existing window frame | $35 – $55 ea | Size and mesh grade |
| New window screen frame built | $45 – $75 ea | Opening size |
| Whole-house rebuild (8–12 screens) | $260 – $700 | Count and frame condition |
| Sliding door rescreen | $65 – $110 | Door size |
| Roller and track repair | $95 – $165 | Hardware vs. full track |
| Specialty shape or arched screen | $70 – $140 ea | Complexity |
Rescreen the frame or build a new one?
Hold the frame by two opposite corners and twist gently. If it flexes noticeably or a corner key moves, the frame is done and rescreening it is throwing good mesh at bad aluminum. If it stays square and the corners are tight, rescreening is the cheaper and better answer. On newer Wesley Chapel construction most window frames are still square; corrosion and previous repair attempts are more common in the older county towns.
Mesh choices for windows
Standard fiberglass is fine for most windows. Where it is worth upgrading: bedrooms backing to a wooded conservation buffer or a retention pond benefit from 20×20 no-see-um mesh, since sand gnats will absolutely come through standard weave at night. Windows a cat treats as furniture want pet mesh. And west-facing rooms on unshaded lots that cook in the afternoon can use a solar weave that cuts a meaningful amount of heat gain without blacking out the view.
Related work
If your screen door frame is bent beyond straightening, see screen door replacement. If the windows and doors are part of a larger enclosure project, lanai screen repair or pool cage rescreening is usually the more economical way to bundle it into one visit.
New-construction screens straight from the builder
A fair number of our window screen calls come from homeowners in brand-new sections of Epperson, Watergrass and Union Park whose builder-supplied screens were never quite right to begin with — a corner that was never fully seated, a frame cut slightly short, mesh that was pulled too tight during a rushed final walkthrough and split within the first year. Builder-grade screens are not always built to the standard a dedicated screen company works to, and correcting one or two problem screens on an otherwise new house is common enough that we do not treat it as unusual.
Where we do window and door screens
Everywhere in our service area at no trip charge, including Wesley Chapel, Land O’ Lakes, New Tampa, Lutz and Odessa.
Questions
Window & Door Screen Repair FAQs
Rescreening your existing frame runs $35 to $55 per screen. A new frame built to your opening runs $45 to $75. A whole-house rebuild of eight to twelve screens generally lands between $260 and $700, which works out considerably cheaper per screen than doing them one at a time.
Usually yes, and it is the cheaper option. Hold the frame by two opposite corners and twist gently. If it stays square and the corner keys are tight, rescreening is the right call. Most window frames on newer Wesley Chapel construction are still straight; older frames that flex or have a moving corner do better with a new frame.
About seventy percent of the time it is worn rollers combined with a bottom track that has been bent by years of forcing the door. New rollers alone will not fix a bent track, and a new door on a bent track will jump exactly the same way. We check both and quote them together so the fix actually holds.
We repair first where repair makes sense, because it is usually a fraction of the cost. Rollers, tracks, handles and latches are all serviceable parts. We recommend full replacement only when the door frame itself is bent, corroded or has been previously repaired past the point of holding square.
Meaningfully cheaper, yes. The trip and the setup are the same whether we build one screen or twelve, so the per-screen cost drops noticeably on a whole-house rebuild. If you have several torn screens and are considering doing them gradually, doing them together will cost less overall.
Standard fiberglass for most homes. If you back up to a pond, conservation easement or wooded buffer and are getting bitten with the windows open, 20x20 no-see-um mesh closes the gaps sand gnats come through. West-facing rooms on unshaded lots that overheat in the afternoon can use a solar weave that cuts heat gain without blacking out the view.
Yes. Arched, triangular, trapezoid and other non-standard openings are all doable, typically $70 to $140 each depending on complexity. We template the opening on site rather than working from measurements alone, because odd shapes rarely match their nominal dimensions.
Not necessarily. If the screens are accessible from outside we can remove, rebuild and reinstall without entering the house. Interior-mount screens and second-floor windows that need inside access do require someone home. We will tell you which applies when we book.
Standard fiberglass gives you roughly five to eight years here, less on west and south exposures on unshaded newer lots where UV is harshest. Aluminum frames last far longer than the mesh, which is why rescreening existing frames is so often the economical choice. Pet mesh and heavier weaves stretch that to eight to twelve years.
Yes, as long as the window has a channel or track to accept a screen frame. Most Florida windows do. We measure and build to the opening. Windows with no provision for a screen at all need an external mount frame, which we can do but which sits slightly proud of the wall.
Related
Other screen work we do
Get a price for your window and door screen repair
Free on-site estimate with a flat written price before we start. Call or send photos and we will tell you what it costs.
Mon–Sat 7:00am–7:00pm · Licensed & insured · Serving Wesley Chapel, Zephyrhills, Lutz & New Tampa